D-Link AirPro DI-764 Manual page 24

Using the Configuration Menu
Advanced > Filters > IP Filters
Filters are used to deny or allow LAN (Local Area Network) computers from accessing
the Internet. The DI-764 can be setup to deny internal computers by their IP or MAC
addresses. The DI-764 can also block users from accessing restricted web sites.
IP Filters
IP:
Port:
Protocol Type:
Schedule:
Apply:
Use IP Filters to deny LAN IP addresses from accessing the
Internet. You can deny specific port numbers or all ports for
the specific IP address.
the IP address of the LAN computer that will be denied
access to the Internet.
the single port or port range that will be denied access to the
Internet.
select the protocol type
this is the schedule of time when the IP Filter will be enabled.
click Apply to save changes.
24