Advertisement
Quick Links
This product can be set up using
any current web browser, i.e.,
Internet Explorer 6.0, Netscape
Navigator 6.2.3.
Before You Begin
1. If you purchased this router to share your high-speed Internet connection with other
computers, you must have either an Ethernet-based Cable or DSL modem with an
established Internet account from an Internet Service Provider (ISP).
2. It's best to use the same computer that is connected to your modem for configuring
the DI-764 Multimode Wireless Router. The DI-764 acts as a DHCP Server by
default and will assign all the necessary IP address information on your network.
See Appendix at the end of this Quick Installation Guide or the Manual on the
CD-ROM for setting each network adapter to automatically obtain an IP
address.
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DI-764.09052002
DI-764 Multimode Wireless Router
CD-ROM (containing Manual and Warranty)
Ethernet (CAT5 UTP/Straight Through) Cable
5V DC, 3A Power Adapter
DI-764
2.4/5GHz Multimode
Wireless Router
Using a power
supply with a
different voltage rating
will damage and void
the warranty for this
product.
Advertisement
Related Manuals for D-Link DI-764
Summary of Contents for D-Link DI-764
-
Page 1: Before You Begin
5V DC, 3A Power Adapter If any of the above items are missing, please contact your reseller. ©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DI-764.09052002 DI-764 2.4/5GHz Multimode... - Page 2 First, connect the power adapter to the receptor at the back panel of the DI-764 and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.
-
Page 3: Restart Your Computer
Connecting Additional Computers To The DI-764 Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped computers to the remaining Ethernet LAN ports on the back panel of the DI-764 M1 LED – a solid light indicates that the DI-764 is ready. -
Page 4: Using The Setup Wizard
When you have completed the steps in this Guide, your connected network should look similar to this: Using The Setup Wizard Open your Web browser and type “http://192.168.0.1” into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. - Page 5 The Setup Wizard (continued) Once you have logged in, the Home screen will appear. Click Run Wizard You will see the following screens Click Next Step 1 - Set up your new password. You have the option to establish a password.
- Page 6 The Setup Wizard (continued) Step 2 Choose your time zone. You will be prompted to select the your time zone for your router Click Next Step 3 – Select your Internet Connection. prompted to select the type of Internet connection for your router. Select one of these settings...
- Page 7 The Setup Wizard (continued) If you selected Dynamic IP Address, this screen will appear: Click the “Clone MAC Address” button to automatically copy the MAC address of the network adapter in your computer. You can also manually type in the MAC address.
- Page 8 The Setup Wizard (continued) If your ISP uses PPPoE (Point-to-Point Protocol over Ethernet), and this option is selected, then this screen will appear: Please be sure to remove any existing PPPoE client software installed on your computers. Enter in the username and password provided to you by your ISP.
- Page 9 The Setup Wizard (continued) If you wish to use encryption for your 802.11a network, the DI-764 is capable of three levels of wireless encryption - 64-bit, 128-bit, and 152-bit. By default the encryption is disabled. You can change the encryp- tion settings for more secure wireless communication.
- Page 10 The Setup Wizard (continued) If you wish to use encryption for your 802.11b network, the DI- 764 is capable of three levels of wireless encryption - 64-bit, 128- bit, and 256-bit. By default the encryption is disabled. You can change the encryption settings for more secure wireless communication.
- Page 11 Finalize Setup and Test Internet Connection. Click Close You will be returned to the Home tab. Click Exit Then relaunch your Web browser (i.e., Internet Explorer or Netscape Navigator), to link to your favorite Web site to test your Internet connection. For additional settings or information, refer to the Advanced, Tools,...
- Page 12 Here’s how to configure the network adapter to obtain an IP address automatically for the DI-764 Broadband Router. Microsoft Windows XP: Go to Start > right click on My Network Places >...
- Page 13 Apple Macintosh OS X: Go to the Apple Menu Click on Network and Select System Preferences Select Built-in Ethernet in the Show pull-down menu Select Using DHCP in the Configure pull- down menu Click on Apply Now The IP address information, the Subnet Mask, the Router’s IP address and the Ethernet adapter address will appear...
- Page 14 NOTES...
- Page 15 NOTES...
-
Page 16: Technical Support
Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone.