D-Link AirPro DI-764 Manual page 15

Using the Configuration Menu
Home > WAN > Dynamic IP Address
Please be
sure to
remove any
existing
PPPoE client
software
installed
on your
computers.
Dynamic
IP Address-
Host Name-
MAC Address-
Clone
MAC Address-
Apply-
most Cable modem users will select this option to obtain an IP
Address automatically from their ISP (Internet Service Pro-
vider).
this is optional, but may be required by some ISPs. The host
name is the device name of the Router.
the default MAC Address is set to the WAN's physical interface
MAC address on the Router.
copy the MAC address of the Ethernet card installed by your
ISP, and replace the WAN MAC address with this Ethernet card
MAC address. It is not recommended that you change the de-
fault MAC address unless required by your ISP.
click Apply to save the changes.
15