D-Link AirPro DI-764 Manual page 13

2.4 ghz / 5 ghz multimode wireless broadband router

Hide thumbs Also See for AirPro DI-764:

Table of Contents

Using the Configuration Menu

Home > Wireless > 802.11a

Wireless Settings-

SSID-

Channel-

Turbo Mode-

If you enable Turbo mode on the DI-764, make sure to also enable Turbo

mode on all 802.11a wireless clients or a wireless connection will not be

established.

WEP-

WEP Encryption-

WEP (Wired Equivalent Privacy) If you enable encryption on the DI-764

make sure to also enable encryption on all 802.11a wireless clients or

wireless connection will not be established.

Key Type-

Hexadecimal digits consist of the numbers 0-9 and the letters A-F

ASCII (American Standard Code for Information Interchange) is a code for

representing English letters as numbers from 0-127

Keys 1-4-

Apply-

choose 802.11a or 802.11b+. Here, 802.11a is selected.

"default" is the default setting. All devices on the network must

share the same SSID. If you change the default setting, the

SSID may be up to 32 characters long.

52 is the default channel for 802.11a. All devices on the net-

work must share the same channel.

select ON or OFF. The default setting is OFF.

select Enabled or Disabled. Disabled is the default setting.

select the level of encryption desired: 64, 128 or 152-bit

select HEX or ASCII

input up to 4 WEP keys; select the one you wish to use.

click Apply to save the changes.

Table of Contents