D-Link AirPro DI-764 Manual page 30

Using the Configuration Menu
Advanced > Performance > 802.11a
Wireless
Performance-
Data Rate-
Transmit Power-
Beacon interval-
RTS Threshold-
Fragmentation-
DTIM interval-
Authentication-
Open System -
Shared Key -
Apply-
select 802.11a or 802.11b+. Here, 802.11a has been
chosen. This screen displays the wireless performance
features of the Access Point portion of the DI-764.
best is the default selection
full is the default selection.
beacons are packets sent by the DI-764 to synchronize a wire-
less network. Specify a value. 100 is the default setting and is
recommended.
this value should remain at its default setting of 2342. If incon-
sistent data flow is a problem, only a minor modification should
be made.
this value should also remain at its default setting of 2346. If
you experience a high packet error rate, you may slightly in-
crease your Fragmentation value within the range of 256-2346.
Setting the Fragmentation value too low may result in poor per-
formance.
(Delivery Traffic Indication Message) 1 is the default setting. A
DTIM is a countdown informing clients of the next window for
listening to broadcast and multicast messages.
select Open system or Shared Key
the DI-764 will be visible to all devices on the network. This is
the default setting
in this mode, in order to access the DI-764 on the network, the
device must be listed in the MAC Address Control List
click Apply to save the changes
30