Recall Time; Pause Time - BT 500 User Manual

Recall time

Recall is used when connected to certain switchboards, for
transferring calls to another extension number, and for some
network services, such as Call Waiting. Contact your network
or switchboard provider for advice on how to use the button.
You may need to change the recall time according to your
switchboard. The recall settings are 100ms, 200ms, 500ms
and 900ms. The default setting for recall in the UK is 100ms.
1. Press to open the main menu.
Menu
2. Use the
NAVIGATION
and press to select.
OK
3. Press to highlight
DOWN
4. Press or to highlight
UP DOWN
5. Press or to highlight the setting you want and
UP DOWN
press to confirm.
OK
6. Press to exit and return to standby.

Pause time

When using your BT Verve 500 with a switchboard, you may
need to enter a pause to allow time for you call to be
connected to an outside line.
If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com
Verve 500 – New Style – Edition 3 – 07.09.06 – 7706
buttons to highlight the
and press
Base Settings
Recall Time
Only change this setting if advised to
do so by your switchboard provider.
Please consult your switchboard
provider if you are unsure which
setting you require.
symbol
.
OK
and press .
OK
39
Phone settings