Setting Pauses; To Set The Recall Time - BT DIVERSE SOLO User Manual

Press the OK button to confirm.
Or
Press the DOWN button until the display shows
TONE.
Press the OK button to confirm.
Press the RED PHONE button.

Setting pauses

If you want to insert a pause into a telephone number you
are storing in your directory, start storing the number
(see page 12) and where a pause is needed, press and hold
the button. A'

To set the recall time

You need only adjust this setting if your switchboard
requires a different recall time to the pre-set recall
time of 100 MS.
Press the GREEN PHONE button.
Press the OK button to open the menu.
Press the DOWN button until the display shows TBR.
Press the OK button.
Press the DOWN button to select the flash time 80,
100, 120, 180, 250, 300 or 600 msd.
Press the OK button to confirm.
Press the RED PHONE button.
100 MS is the standard setting for most UK switchboards.
Please note
P ' will appear in the number.
Please note
21