Time Stamp On/Off; Monitoring/Call Screening - BT 500 User Manual

5. Press or to select the setting you require and
UP DOWN
select .
OK
6. Press to exit and return to standby.

Time stamp on/off

With this setting on, your BT Verve 500 will save and
announce the day and time with each recorded message.
1. Press to open the main menu.
Menu
2. Use the
NAVIGATION
and press to select.
OK
3. Press to highlight
DOWN
4. Press to highlight
DOWN
5. Press the right soft key to select either
6. Press to exit and return to standby.

Monitoring/call screening

With monitoring set to on, when the answering machine
takes a call, you can listen to the caller leaving a message
over the loudspeaker. If you decide you want to take the call
in person, you can pick up the handset or press
With monitoring set to off, you will not be able to hear the
caller leaving a message.
If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com
Verve 500 – New Style – Edition 3 – 07.09.06 – 7706
buttons to highlight the
and press
Setting OK
.
Time Stamp
or
Off
symbol
.
If time stamp is on, a
displayed alongside the setting.
.
On
If time stamp is set to off, the date
and time will not be announced and
will be replaced by a 2 second pause.
If monitoring is on, a
displayed alongside the setting.
The answering machine automatically
stops recording if you take the call
/ .
in person.
The default setting is on.
Answering machine
will be

will be

45