BT 500 User Manual page 9

2. is displayed, press
Clock Setting
3. The current time and date setting is displayed. Enter 2 digits
for the hour and 2 for the minute (e.g. for 2.15pm, enter
, , ,
automatically, now enter 2 digits each for the day, month and
year, e.g. for 6 th May 2006 press
, then press
4. Press to exit and return to standby.
BT Verve 500 multiple pack owners
For each additional handset:
1. Plug the power adaptor cable into the underside of the charger
and plug the other end into the mains wall socket and switch
the power on.
2. Insert the batteries as described on page 7, point 2.
3. Place the handset in the charger and charge for at least
24 hours.
4. Any additional handsets that came with your BT Verve 500
are ready for immediate use and normally there is no need to
register them to the base. If you do need to register a
handset, please see page 33.
Your BT Verve 500 is ready for use.
If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com
Verve 500 – New Style – Edition 3 – 07.09.06 – 7706
to select.
OK
). The cursor moves across
, ,
to confirm.
OK
The charge capacity of rechargeable
batteries will reduce with time as they
wear out, giving the handset less
talk/standby time. Eventually they
will need to be replaced. New battery
packs are available from the BT Verve
500 Helpline on 0870 242 6652.
After charging your handset for the
, ,
first time, subsequent charging time
is about 6–8 hours a day.
The battery and handset may become
warm during charging. This is normal.
If you subscribe to a Caller Display
Service from your network provider
the time will be set when you receive
your first call.
The default time setting is 12:01pm.
The default time setting is 1st January
2006 (01/01/06).
You need to place your BT Verve 500
charger close enough to a mains
power socket so that the cable
will reach.
Getting started
9