Playback Control Buttons - JVC LT-32DE9BJ Instructions Manual

RecoRDing AnD PLAybAcK (in DigitAL tV MoDe onLy)

Playback control buttons

Pause
If you press the PAuSe (
programme is paused. If you press the PAuSe (
programme is resumed from that point..
note: Pause makes the time gap or delay between the broadcasting
(live) point and watching point. The time gap is equivalent to the period the
programme was paused. Operations like slow motion and fast rewind also
make the time gap. Press the StoP (
Stop
Press the StoP (
programme.
Fast Forward to the next Scene
Press the FASt FoRWARD (
the FASt FoRWARD (
If you press the PLAy (►) button, the fast forward operation stops and the programme is played at normal speed.
note: You can use the fast forward operation only when there is a time gap between the current watching point and the
broadcasting (live) point caused by some previous operations such as pause, slow motion or fast rewind. You can fast
forward to the current broadcasting point. If the watching point reaches the broadcasting (live) point, the programme is
automatically played at normal speed.
Fast Rewind to the Previous Scene
Press the FASt ReWinD (
FASt ReWinD (
If you press the PLAy (►) button, the fast rewind operation stops and the programme is played at normal speed.
note: You can fast rewind back to the start point. If you reach the start point while rewinding, the programme is
automatically played at normal speed from that point.
Slow Motion
Press the SLoW button to play the current programme in slow motion. Each time you press the SLoW button, the
speed decreases (x 1/2 , x 1/4, x 1/8). Press the PLAy (►) button to stop playing in slow motion and return to normal
speed.
instant Replay
Press the RePLAy button to replay the current programme from the 7 seconds before. When the replay has been
completed, the programme will play from the current point.
To change the instant replay time, refer to Miscellaneous Settings (p.4).
commercial Skip
Press the SKiP button to skip 0 seconds ahead from the current watching point. You can use the skip operation only
when there is a time gap between the current watching point and the broadcasting point. If the time gap is less than
0 seconds, the programme is played from the current broadcasting point. To change the commercial skip time, refer
to Miscellaneous Settings (p.4).
GB-
)button on the remote control, the current
) button to go to the live programme.
) button to stop the playback and go to the live
) button on the remote control to fast forward the programme. Each time you press
) button, the speed increases. ( x, x4, x, x, x4)
) button on the remote control to watch the scene passed by. Each time you press the
) button, the rewind speed increases. ( x, x4, x, x, x4)
) button once again, the