Table of Contents
Advertisement
Menu SettingS
installation Settings
● country: Shows the country.
● Antenna Power: Off - On
If you connect an active antenna to the TV, you have to set the
Antenna Power to on to supply the 5V power into antenna. The
default value is off. Active antenna is a portable or indoor antenna
which needs power supply from the product because it does not have
power cord for itself.
● Auto Search: (Refer to p.31)
● Manual Search: (Refer to p.32)
● edit channels: (Refer to p.32)
Feature Settings :
● Language: Shows the main language.
● time Setting: (Refer to p.29)
● Parental control: (Refer to p.29)
● oSD transparency: 30 - 50 - 70 - 100 - Disable
● blue back: Off - On
When watching a channel with no or poor reception, or if there is no input from an external device, you can
change the screen into a blue.
● Power Lamp: On - Off
Illuminates the power lamp in blue on the front panel.
● 4:3 Aspect Setting: Panoramic - Regular (Refer to p.22)
Select a default aspect ratio for 4:3 signal when the aspect ratio is set to Auto. (except when 480p/576p mode)
● Default Setting: (Enabled only in Analog TV mode.)
Sets the current all settings of the TV to the default settings except for the Digital TV mode settings.
note:
▪
Please note that once you perform the Default Setting, all data such as analog channel list, and user configured data are
deleted.
▪
After completing the default setting, the installation wizard (APS) for analog channels will appear automatically in a few
seconds.
▪
For more information about Default Setting of the digital channels, refer to p.0.
GB-8
(in Analog tV Mode only)
> Feature
:
> installation
> i n s t a l l a t i o n
Countr y
Antenna Power
Auto Search
Manual Search
Edit Channels
Move
Enter
> F e a t u r e
Language
Time Setting
Parental Control
OSD Transparenc y
Blue Back
Power Lamp
4:3 Aspec t Setting
Default Setting
Move
Enter
UK
O ff
English
30
O ff
On
Panoramic
Advertisement
Table of Contents
