Network Management (Snmp) Commands - D-Link xStack DES-3800 Series Cli Manual

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual

Network Management (SNMP) Commands

The network management commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
The DES-3800 Series supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3.
After enabling SNMP, you can specify which version of SNMP you want to use to monitor and control
the Switch. three versions of SNMP vary in the level of security provided between the management
station and the network device. The following table lists the security features of the three SNMP versions:
SNMP Authentication
Version Method
v1 Community String
v2c Community String
v3 Username
v3 MD5 or SHA
v3 MD5 DES or SHA
DES
Description
Community String is used
for authentication −
NoAuthNoPriv
Community String is used
for authentication −
NoAuthNoPriv
Username is used for
authentication −
NoAuthNoPriv
Authentication is based on
the HMAC-MD5 or HMAC-
SHA algorithms −
AuthNoPriv
Authentication is based on
the HMAC-MD5 or HMAC-
SHA algorithms − AuthPriv.
DES 56-bit encryption is
added based on the CBC-
DES (DES-56) standard
29
7