Login - D-Link DES-1526 Manual

Web-smart 26-port ethernet switch with 24 10/100mbps 802.3af power over ethernet ports & 2 10/100/1000mbps combo gigabit ethernet ports

Hide thumbs Also See for DES-1526:

Table of Contents

Login

Before you configure this device, note that when the Web Smart

Switch is configured through an Ethernet connection, make sure

the manager PC must be set on same the IP network. For

example, when the default IP address of the Web Smart Switch is

192.168.0.1, then the manager PC should be set at 192.168.0.x

(where x is a number between 2 and 254), and the default subnet

mask is 255.255.255.0.

Open the Web browser program and Enter IP address

http://192.168.0.1 (the factory-default IP address setting) to the

address location.

Figure 14.

Or through the Web Management Utility, you do not need to

remember the IP Address, select the device shown in the Monitor

List of the Web Management Utility to settle the device on the

Web browser.

When the following dialog page appears, enter the default

password "admin" and press Login to enter the main

configuration window.

Table of Contents

Show Quick Links

Table of Contents