D-Link DES-1526 Manual page 56

Abnormal* Transmit Error: A trap when there is a transmit
data error in the twisted pair port.
Abnormal*: 50 error packet count within 10 seconds.
PoE Events: Monitoring the PoE ports status.
PoE Power fail: A trap when the port's power source fails or
the PD64012 fails.
Power over current: A trap when the PoE port's power is
over current.
Power short circuit: A trap when the PoE port's power circuit
was short.
Delete Trap: To delete previously defined SNMP Trap, press
the "Delete Trap" button. The Delete SNMP Trap Delete
configuration window will pop up; check the delete dialog box.
Press "Apply" to delete the selected SNMP Trap setting.
Figure 30. Delete SNMP Trap
Modify Trap: To modify a previously defined SNMP Trap,
click on the ID parameter to enter to the selected SNMP Trap to
configure its community name, IP address, and events. Press
"Apply" to save changes of the SNMP Trap.
48