D-Link DES-1526 Manual page 53

Delete Group: To delete previously defined SNMP Community
group, press the "Delete Group" button. The Delete SNMP
Community configuration window will pop up; check the delete
dialog box. Press "Apply" to delete the selected SNMP
Community Group.
Figure 26. Delete SNMP Community group
Modify Group: To modify a previously defined SNMP
Community group, click on the ID parameter to enter to the
selected SNMP Community Group to configure its community
name and community enable. Press "Apply" to save change of
the SNMP Community Group.
Figure 27. Modify SNMP Community group
45