Miele CVA 6805 Operating And Installation Instructions page 87

Problem
The drinking vessel be‐
ing used is repeatedly
not recognised by the
automatic spout adjust‐
ment.
The central spout low‐
ers until it touches the
top of the cup or glass
and cup protection
switch-off is activated.
Cup protection switch-
off does not work. The
central spout lowers
until it touches the top
of the vessel and the
cleaning container or
another vessel gets
caught between the
central spout and the
drip tray.
Possible cause and remedy
The container is unsuitable for the cup sensing sys‐
tem.
 Use cups or glasses that are suitable for automat‐
ic spout adjustment.
There is a fault with the automatic spout adjustment.
 Switch the machine off with the On/Off  sensor.
Wait for approx. 2 minutes before switching it
back on again.
 Use another drinking vessel and prepare a drink.
 If cup protection switch-off is activated again or
the central spout lowers until it touches the top of
the cup or glass again, please contact Miele.
If the cleaning container is sitting too close to the
panel behind the central spout, or even touches it, the
rim of the container will not be properly recognised by
the automatic spout adjustment.
 Move the cleaning container forwards a little.
Problem solving guide
87