Water Hardness; Display Brightness; Volume; Activating And Deactivating Mains Water Connection - Miele CVA 6805 Operating And Installation Instructions

Settings

Water hardness

See "Setting up and using the coffee
machine" for information about water
hardness.

Display brightness

You can set the display brightness us‐
ing the bar chart.

Volume

You can set the volume of buzzer and
keypad tones using the bar chart.
Activating and deactivating
mains water connection
The coffee machine is designed to be
operated with a mains water connec‐
tion. If this option is activated, the water
container will be filled automatically via
the mains water hose. If mains water
connection is deactivated, the water
container must be filled manually.
56

Warming drawer

You can connect a warming drawer di‐
rectly to the coffee machine with a spe‐
cial connection cable (optional acces‐
sory). Suitable warming drawers for this
coffee machine are listed earlier in
these operating instructions. You can
also contact Miele should you require
further information.
The special connection cable needed
can be purchased by contacting Miele.
After connecting the appliance to the
electricity supply, you need to activate
the warming drawer in
You can choose one of the following
options:
– : The warming drawer will
Automatic
switch on and off together with the
coffee machine.
If you have programmed the
timer, the warming drawer will
on at
switch on approx. 30 minutes before
the coffee machine switches on in
order to pre-heat your cups.
– : You can switch the warming
On
drawer on or off at any time inde‐
pendently of the coffee machine.
– : The warming drawer cannot be
Off
switched on (the pre-requisite for this
option is that the warming drawer
must be connected to the coffee ma‐
chine via the connection cable).
The warming drawer is set to
factory.
.
Settings
Switch
at the
Off