Miele CVA 6805 Operating And Installation Instructions page 83

Problem
The coffee machine
does not switch itself
on, although the
setting has been
on at
activated for the timer.
The display is hard to
see or not able to be
read.
Fill and replace the water
appears after
container
switching on even
though the container is
filled and fitted in the
machine. The appliance
does not rinse.
Possible cause and remedy
The system lock has been activated.
 You need to deactivate the system lock (see "Set‐
Switch
tings - System lock").
A day of the week has not been selected.
 Check the timer settings and change them if re‐
quired (see "Settings - Timer").
The machine was not used after being switched on
automatically three times in succession.
 Switch the machine on and dispense a drink.
The display brightness has been set too low.
 Change this setting (see "Settings").
The coffee machine needs descaling.
 Switch the machine off with the On/Off  sensor.
Wait approx. 1 hour.
 Then switch the machine on again. As soon as
Heat-up phase
tenance
select
 Descale the coffee machine. You may need to re‐
peat the descaling process.
Problem solving guide
appears in the display, touch
at the bottom right-hand corner and then
.
Descale
Main-
83