Search And Store; Quick Search - Uniden BCD396XT Reference Manual

Receive LTR Control Channel:
The scanner displays LT System and TGID. The scanner toggles the following display while receiving it.
Custom 1
I D: 0- 01- 001
851. 0125
Key Operation :
Turn [Scroll Control] to resume Frequency Search.
When receiving a Motorola control channel, press [6 / RIGHT / disp] key in Function Mode to change the
system ID name display (Display Mode 1,3) and system ID display (Display Mode 2). This
Scan Mode, because this is used for Group Quick Key operation.

Search and Store

The scanner searches and stores found frequencies or TGIDs automatically. You can make the scanner
perform this function by menu selection. See Search and Store for details.
In this operation, the setting of Set C-Ch Only is invalid.

Quick Search

Quick Search searches all bands.
You can start Quick Search by pressing [SCAN / srch] key in Function Mode during Scan Mode, Scan Hold
Mode, Close Call Mode, Weather Scan Mode and Tone-Out Mode. The scanner prompts "Quick Search?".
If you press [E / yes / gps, the scanner starts Quick Search.
If you press [. / no / pri, the scanner goes to
If you press [Hold /
Pressing [L/O] cancels the prompt and it returns to previous mode.
Friday, November 07, 2008
1 2 3 4 5 6 7 8 9 0
Qui ck Search?
Yes= E / No= .
], the scanner goes directly to Quick Search Hold Mode.
LT System
I D: 0- 01- 001
851. 0125
1 2 3 4 5 6 7 8 9
Menu at Search for....
149
in