If DEG:DDD.dddddd is selected in Set Pos Format, the display is the following.
Set Longitude
Enter the longitude data using the number keys.
Press any number key when the cursor is in the last position to toggle between west longitude (W) and
east longitude (E).
Then press [E / yes / gps] to accept and return to the previous menu.
If DMS:DDD MM SS.ss is selected in Set Pos Format, the display is the following.
If DEG:DDD.dddddd is selected in Set Pos Format, the display is the following.
Set Range
In this menu, the setting unit depends on the setting in Set Unit.
When you select mile in Set Unit, the displayed unit is mile.
When you select km in Set Unit, the displayed unit is km.
The valid setting range is from 0.5 to 125.0 in 0.5 steps.
Press [E / yes / gps] to accept the setting and return to the previous menu.
Friday, November 07, 2008
Set Lati tude
00. 000000
Set Longi tude
000 00 00. 00
Set Longi tude
000. 0000
57
N
W
W