Auto Search And Store; Selecting A System - Uniden SC230 Owner's Manual

SC230 Paper OM.fm Page 70 Wednesday, October 6, 2004 10:51 AM
and Srch, then No. One of the search feature options
appear.
2. Turn the scroll control until EDIT CUSTOM appears,
then press E to select it.
3. Turn the scroll control until the name of the custom
search range you want to edit appears, then press E
to select it. The following options appear as you turn
the scroll control.
EDIT NAME - lets you edit the custom search range's
name
EDIT SRCH LIMIT - lets you view and select the
frequency ranges to search. The scanner prompts
you to enter the upper and lower search limits.
SET DELAY TIME - lets you set the amount of time the
scanner will delay before continuing to search after a
transmission ends
SET MODULATION - lets you set the custom search
range's modulation type
SET ATTENUATOR - lets you set whether the scanner
will attenuate reception by 18dB during search
SET DATA SKIP - lets you set whether the scanner will
skip data transmissions during search
SET STEP - lets you set the custom search range's
step (the gap between frequencies)
4. Select the option you want to change for the custom
search range you selected, then press E.

Auto Search and Store

Your scanner's Auto Store feature lets you search for new
frequencies in custom search ranges or within a service
search range.

Selecting a System

To store frequencies you find during Auto Store, you must
first select a system where the frequencies will be stored.
1. Press then turn the scroll control until Search
Menu
For ... appears. Then press E. One of the search
feature options appear.
Searching and Storing
70