Displays; Lcd Design; Icons - Uniden BCD396XT Reference Manual

Displays

LCD Design

The reference design shown below is for illustration purposes only and is not intended to be a
photorealistic representation of the display.

Icons

Sx: :
GRP:
1 - 9, 0:
HOLD:
L/O:
PRI :
GPS:
AM / FM / NFM / FMB
/ WFM:
ATT:
P25:
Friday, November 07, 2008
F HOLD L/O PRI
ABCDEFGHI JKLMNOP
abcdefghi jklmnop
P WFM
S0: 1 2 3 4 5 6 7 8 9 0
GRP 1 2 3 4 5 6 7 8 9 0
This icon appears with icons of System and Site Quick Key numbers (from 0 to
99 ). x shows the current ten s place of Quick Keys for Systems or Sites.
This icon appears with icons of Quick Key number for Channel Groups (1 - 9, 0).
In SCAN mode, the numbers of unlocked Quick Key for Systems/Channel Group
are displayed. The number for the currently scanned SQK set flashes.
In SCAN HOLD mode, the Quick Key number for the current System/Channel
Group appears.
Enabled User Range numbers appear in Custom Search; the
number blinks.
This icon appears in Scan Hold, Search Hold and Close Call Hold Mode.
This icon appears at a locked out Channel or frequency.
This icon turns on during Priority Scan and this blinks during Priority Plus.
This icon appears when the scanner receives GPS data. This shows in the same
place as " ".
These icons show the modulation type.
This icon appears when a channel has attenuator on and blinks when global
attenuator is on.
This icon shows the receiving digitalized voice of APCO P25.
ATT P25
WX
21