Uniden BCD396XT Reference Manual page 58

Set GPS Enable
When this option is set to On , the scanner will control the L/O status of this channel group using position
information supplied from a connected GPS.
On The
Off The
Press [E / yes / gps] to accept and return to the previous menu.
Set Lockout
This option allows you to lock or unlock the current channel group. When the channel group is locked out,
the scanner does not check it.
Unlocked
Temporary L/O
Lockout
Press [E / yes / gps] to accept the selection and return to the previous menu.
Delete Group
You can delete the current channel group and all associated settings by select this menu item. The scanner
prompts "Confirm Delete?" to confirm deletion.
Press [E / yes / gps] to delete the current channel group.
Press [. / no / pri] to cancel deletion and return to the previous menu.
New Group
Press [E / yes / gps] to create a new group and go to Group Settings.
Friday, November 07, 2008
L/O state is automatically controlled by position information.
L/O state is not influenced by GPS.
The channel group is unlocked.
The channel group is temporarily locked out.
The channel group is locked out.
58