Table of Contents
Advertisement
6. Type the type command at the format> prompt, then select 0 (zero) to auto
configure the volume.
For example:
format> type
AVAILABLE DRIVE TYPES:
Specify disk type (enter its number)[19]: 0
c0t0d0: configured with capacity of 68.35GB
<SUN72G
selecting c0t0d0
[disk formatted]
7. Use the partition command to partition, or slice, the volume according to your
desired configuration.
See the format(1M) man page for additional details.
8. Write the new label to the disk using the label command.
format> label
Ready to label disk, continue? yes
54
Sun SPARC Enterprise T1000 Server Administration Guide • April 2007
0. Auto configure
1. Quantum ProDrive 80S
2. Quantum ProDrive 105S
3. CDC Wren IV 94171-344
4. SUN0104
5. SUN0207
6. SUN0327
7. SUN0340
8. SUN0424
9. SUN0535
10. SUN0669
11. SUN1.0G
12. SUN1.05
13. SUN1.3G
14. SUN2.1G
15. SUN2.9G
16. Zip 100
17. Zip 250
18. Peerless 10GB
19. LSILOGIC-LogicalVolume-3000
20. other
cyl 14087 alt 2 hd 24 sec 424>
Advertisement
Table of Contents
