Controlling The Locator Led; Automatic System Recovery; Figure 2-1 Locator Button On The Front Of The Server Chassis - Sun Microsystems SPARC Enterprise T1000 Administration Manual

Controlling the Locator LED

You control the Locator LED from the sc> prompt or by the Locator button on the
front of the chassis.
Locator Button/LED
FIGURE 2-1
●
To turn on the Locator LED from the system controller command prompt, type:
sc> setlocator on
●
To turn off the Locator LED from the system controller command prompt, type:
sc> setlocator off
●
To display the state of the Locator LED from the system controller command
prompt, type:
sc> showlocator
Locator LED is on.
Note – You do not need user permissions to use the setlocator and
showlocator commands

Automatic System Recovery

The system provides for automatic system recovery (ASR) from failures in memory
modules or PCI cards.
30 Sun SPARC Enterprise T1000 Server Administration Guide • April 2007
Locator Button on the Front of the Server Chassis