To Unconfigure A Device Manually; To Reconfigure A Device Manually; Table 2-5 Device Identifiers And Devices - Sun Microsystems SPARC Enterprise T1000 Administration Manual

To Unconfigure a Device Manually

▼
●
At the sc> prompt, type:
sc> disablecomponent asr-key
The asr-key is one of the device identifiers from
Note – The device identifiers are not case-sensitive. You can type them as uppercase
or lowercase characters.
TABLE 2-5
Device Identifiers
MB/CMPcpu-number/Pstrand_number
PCIEslot-number
MB/PCIEa
MB/PCIEb
MB/CMP0/CHchannel-number/Rrank-number/Ddimm-number
▼

To Reconfigure a Device Manually

1. At the sc> prompt, type:
sc> enablecomponent asr-key
where asr-key is any device identifier from
Note – The device identifiers are not case-sensitive. You can type them as uppercase
or lowercase characters.
You can use the ALOM CMT enablecomponent command to reconfigure any
device that you previously unconfigured with the disablecomponent command.
36 Sun SPARC Enterprise T1000 Server Administration Guide • April 2007
Device Identifiers and Devices
TABLE 2-5
Devices
CPU strand (Number: 0-31)
PCI-E slot (Number: 0)
PCI-E leaf A (/pci@780)
PCI-E leaf B (/pci@7c0)
DIMMS
TABLE 2-5