To Get To The Ok Prompt; Table 1-3 Ways Of Accessing The Ok Prompt - Sun Microsystems SPARC Enterprise T1000 Administration Manual

To Get to the ok Prompt

▼
1. Decide which method you need to use to reach the ok prompt.
See "OpenBoot ok Prompt" on page 18
2. Follow the appropriate instructions in
TABLE 1-3
Access Method
Graceful shutdown of
the Solaris OS
L1-A (Stop-A) keys or
Break key
system controller
break and console
commands
Manual system reset
* Requires the OpenBoot configuration variable input-device=keyboard. For more information, see
tem Console OpenBoot Configuration Variable Settings" on page
22 Sun SPARC Enterprise T1000 Server Administration Guide • April 2007
Ways of Accessing the ok Prompt
What to Do
• From a shell or command tool window, issue an appropriate
command (for example, the shutdown or init command) as
described in Solaris system administration documentation.
• From a Sun keyboard connected directly to the SPARC
Enterprise T1000 server, press the Stop and A keys
simultaneously.
• From an alphanumeric terminal configured to access the system
console, press the Break key.
1. From the sc> prompt, type the break command. The break
command should put the system in a state in which the
operating environment software is not running and the server is
under OpenBoot firmware control.
2. Then issue the console command.
• From the sc> prompt, type the reset command.
for details.
.
TABLE 1-3
*
23.
"Sys-