Sun Microsystems SPARC Enterprise T1000 Administration Manual page 70

3. Delete the volume.
# raidctl -d volume
For example:
# raidctl -d c0t0d0
In the event that the RAID volume is an IS volume, the deletion of the RAID volume
is interactive, for example:
# raidctl -d c0t0d0
Are you sure you want to delete RAID-1 Volume c0t0d0(yes/no)? yes
/pci@7c0/pci@0/pci@8/scsi@2 (mpt0):
/pci@7c0/pci@0/pci@8/scsi@2 (mpt0):
/pci@7c0/pci@0/pci@8/scsi@2 (mpt0):
Volume 'c0t0d0' deleted.
#
The deletion of an IS volume results in the loss of all data that it contains. As an
alternative, you can use the –f option to force the deletion if you are sure that you
no longer need the IS volume, or the data it contains. For example:
# raidctl -f -d c0t0d0
Volume 'c0t0d0' deleted.
#
4. Confirm that you have deleted the RAID array.
# raidctl
For example:
# raidctl
No RAID volumes found
For more information, see the raidctl(1M) man page.
52 Sun SPARC Enterprise T1000 Server Administration Guide • April 2007
Volume 0 deleted.
Physical disk 0 deleted.
Physical disk 1 deleted.