Download Print this page

Remote Engine Control - CrimeStopper Super Rage CS-2011RS Operating Instructions Manual

Remote control alarm system & remote engine starting system
Hide thumbs Also See for Super Rage CS-2011RS:

Advertisement

REMOTE ENGINE STARTING - SUCCESSFUL START:
1) Press remote start button on the remote transmitter.
2) Parking lights flash once, then turn on solid, Ignition/Acc On.
3) After 6 seconds Starter Motor engages, Parking lights and Acc circuits turn off while cranking.
4) Engine Starts and Runs. Parking Lights and Acc turn back on, Doors Lock.
5) Engine will remain running for programmed run time until reset with Brake pedal. If needed, the engine can
be turned off with remote transmitter.
FLASH 1X
START
THEN
SOLID
REMOTE ENGINE STARTING - UNSUCCESSFUL START
In the event that the engine does not start on the first attempt, the system shuts down for a few seconds, then
attempts to restart the engine a 2
time of up to13 seconds maximum. This should provide ample cranking time for difficult starts, but is limited to
13 seconds to help prevent damage to the starter from over cranking.
nd
1) If engine starts on 2
2) If Third attempt fails to start engine, the system will turn off and doors will remain locked. NO FURTHER
ATTEMPTS WILL BE MADE AUTOMATICALLY
TURNING OFF A REMOTE STARTED ENGINE:
1) Engine is running in Remote Start (Parking lights ON).
2) Press Remote Start button on remote transmitter.
3) Engine & parking lights turn OFF, Doors remain locked or will re-lock/re-arm if applicable.

REMOTE ENGINE CONTROL

IGN
nd
rd
and 3
time. For hard starting engines, the unit will allow a starter crank
rd
or 3
attempt, see steps 4 & 5 above of "Successful Start".
AFTER
6
STARTER
SEC.
SOLID

Advertisement

loading