Table of Contents
Advertisement
To Re-Enable Remote Tones:
Follow step 1 above. The unit will automatically switch out of silent mode and beep 5 times/LED flashes 5 times
for confirmation.
FUNCTION
Arm System
Disarm System
Remote Start
Stop Engine
Trunk Pop
Hood/Trunk Alarm Trigger
Door Alarm Trigger
Sensor Pre-Warn
Sensor Trigger
Out of Range
Miscommunication
Low Battery
Valet
Alarm Clock
Remote Start Timer
In-car Page
Silent Mode
Press and release button (II) to reset the current alert or activate the LCD screen back lighting.
1. This unit will remote start whether the alarm is on or off. Starting the engine will not trigger the alarm system if it
is in the armed mode when performing a remote start.
2. The vehicle will still be protected when armed/remote started. If a door/hood/trunk is opened, the alarm will
trigger and the engine will shut down automatically.
3. Quickly pressing button 3 will reset any active message icons on the LCD display.
4. If the alarm is triggered by opening the hood, the LCD Display will show and page as a trunk violation. The LCD
remote does not have a separate Hood-Opening Icon.
5. The control module may not respond to multiple commands. You must allow up to 8 seconds between functions
because the unit is sending/paging information to remote/pager.
LCD PAGER / REMOTE: ICONS & TEXT
ICON/SYMBOL
Downward Arrow
Upward Arrow
Engine Icon Spins
Engine Icon Stops/Disappears
Trunk Opens on Car
NONE
Door Opens on Car
Blinking Hammer
Hammer/Breaking Glass
Blank Cursor
Battery Icon
V Symbol
Alarm Clock
O.K
Blinking CALL
Siren w/Slash
**IMPORTANT NOTES**
Blank Cursor
TEXT
ARM
DISARM
ENGINE RUN
OFF
TRUNK
HOOD
DOOR
WARN
SHOCK
None
None
None
VALET
None
None
None
None
Advertisement
Table of Contents
