Table of Contents
Advertisement
Follow steps below to access Programming Options:
1. Turn the ignition on and press the override/program button 5 times within 5 seconds. You will hear a (2) Second
confirmation chirp from the siren.
2. Within the next 5 seconds press the override/program button [again] the number of times that corresponds to the
listed feature below. The siren will chirp once for each button press.
3. Once you are at the desired option number, press Button (I) or (II) on the remote to change the option. Button (I)
gives on light flash/chirp and Button (II) give two flashes/chirps. See chart below for option selections. Turn OFF
Ignition.
4. Change ONE option at a time and repeat steps 1-3 as needed.
Option # Option Description
1.
Passive Arming
2.
Passive Locks
3.
Active Re-Arm
4.
Silent Arm/Disarm
5.
Double Unlock Pulse
6.
Door Lock Pulse Time
7.
Ignition Controlled Locks
8.
Enable/Disable Cold Start
9.
Cold Start Interval Time
10.
Disarm with Aux. Feature
Activation (Trunk Pop)
11.
Chirp Countdown w/Passive
Arming
12.
5/60 Sec. Door Open Warning
13.
Remote Start Run Time
14.
Doors Lock with Remote Start
15.
Lock After Aborted Remote Start
16.
Parking Lights ON w/Disarm
OPTION PROGRAMMING
PROGRAMMING OPTIONS CHART
Selection
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
0.7 Sec. or3 Sec.
ON or OFF
ON or OFF
Every 2 Hrs. or 1 hr.
ON or OFF
ON or OFF
Button #1 = 5 Sec.
Button #2 = 60 Sec.
Button #1 = 15 Min.
Button #2 = 25 Min.
ON or OFF
ON or OFF
ON or OFF
Button 1
Button 2
ON
OFF
OFF
ON
ON
OFF
OFF
ON
OFF
ON
0.7 Sec.
3 Sec.
ON
OFF
OFF
ON
2 Hrs.
1 Hr.
OFF
ON
OFF
ON
5 Sec.
60 Sec.
15 Min.
25 Min
OFF
ON
ON
OFF
OFF
ON
Factory
Default
ON
OFF
ON
OFF
OFF
0.7 Sec.
ON
OFF
2 Hrs.
OFF
OFF
5 Sec.
15 Min.
OFF
ON
OFF
Advertisement
Table of Contents
