Panasonic CF-W4 Series Reference Manual page 99

SD Memory Card
Important handling and storage information
Always store the SD memory card in its case after removing it from a computer.
Do not:
• Take the SD memory card apart or try to modify it
• Hit, bend, or drop the card; or allow it to get wet
• Touch the metal terminals with your hands or with metal
• Remove the labels on the card / Attach other labels or seals to the card
Do not leave the card in the following locations:
• Locations that can become very hot, like inside a car in direct sunlight
• Dusty locations or locations that are very humid
• Locations subject to corrosive gas, etc.
When logging on to Windows/resuming from standby or
hibernation mode
Do not remove or insert the SD memory card until Windows has completed loading.
After resuming from standby or hibernation mode, do not access the SD memory card for
about 30 seconds.
Protecting important data
Set the write-protect switch (A) to the LOCK position. Unlock the switch when you want to
record (checkout), edit, or save data.
We recommend backing up important data to another storage medium.
Note that Panasonic assumes absolutely no liability for any loss of data recorded by the
user, or any other damages, direct or indirect.
When disposing of cards, we recommend that you physically destroy the card (for
example, by using a hammer) to prevent personal or confidential data from being leaked.
Also refer to "CAUTION" in "Inserting/Removing the SD Memory Card". (
99
page 101)