Panasonic CF-W4 Series Reference Manual page 57

Security Measures
Setting the Password on boot (enabling, disabling)
Starting Up When the Password on boot is Set
1
Run the Setup Utility. (
2
Using either the
3
Using either the
press the
Enter
4
Select [Enable] or [Disable].
To enable the Password on boot:
Using the
To disable the Password on boot:
Using the
5
Press the
F10
The screen shown at left is displayed.
*1
and press the Enter key.
Enter your password
When the correct password is input, the computer will start.
After 3 wrong password attempts have been made or there is no input for one minute, the
computer will power off.
*1
Supervisor Password or User Password set in the Setup Utility (not the Windows password).
page 138)
key or the key, select [Security].
key or the key, select [Password on boot] and
key.
key, select [Enable] and press the Enter key.
key or the
key, select [Disable] and press the Enter key.
key and the
key and select [Yes], then press the
57
key.
Enter