Panasonic CF-W4 Series Reference Manual page 104

SD Memory Card Security Function
4
Click [Next] in the Welcome screen.
5
Select the SD memory card setting method (A).
[Leave set]
When [Leave set] is selected, leaving the SD memory card set serves as a
substitute for inputting the password.
(The card may be removed after the computer or Windows is started.)
[Set and eject]
When [Set and eject] is selected, setting and ejecting the SD memory card
serves as a substitute for inputting the password.
If you use a different method between when starting the computer and when
logging on to Windows:
In this screen, you can set the setting method for when logging on to Windows. To
set the method when starting the computer, run the Setup Utility and change the
setting of [SD Setting Method] in [Security] menu after completing the SD Card
Setup. ( page 145)
6
Make the settings according to the case to be used.
[Use when starting the computer]
An SD memory card will be registered with the computer. (Up to two cards can be
registered. To register the second card:
Add the checkmark for [Use when starting computer] (B) and click [Next].
A
Click [Restart the computer after entering settings], then click [Finish].
B
Enter the Supervisor Password.
C
Up to 32 alphanumeric characters (including spaces) can be used for the
password.
104
page 107)