SD Memory Card Security Function
2
Change the settings or configure another SD Card.
A. Setting for this computer
You can change the settings registered in this computer.
[Use the SD card when starting the computer]
This setting can also be changed on the [Security] menu of the Setup Utility.
• If you add the checkmark
An SD memory card can be used when starting the computer.
• If you remove the checkmark
All SD memory cards currently registered on this computer will no longer
be usable when starting this computer. Remove the checkmark if there is a
possibility of unauthorized card use by another party (e.g., if you lose an
SD memory card).
To use the SD memory card again, add the checkmark for [Use when
starting the computer] under [Setting for this SD card]. It will be registered
with the computer again. (
[Use the SD card when logging on to Windows]
• If you add the checkmark
The SD memory card can be used when logging on to Windows.
• If you remove the checkmark
You will not be able to log on to Windows by inserting an SD memory card
with a set password.
The setting method is set separately for each computer. Different SD memory
cards may not use different setting methods on the same computer.
page
111)
108