Agilent Technologies InfiniiVision 3000 X- Series Advanced Training Manual page 20

2
Oscilloscope Familiarization Labs
Figure 8
You should now observe 6 positive pulses with varying widths, plus an
infrequent glitch occurring after the 6th pulse as shown in
now turn on a "+ Width" measurement.
11
12
13
14
20
Setting up the oscilloscope to capture a burst of digital pulses with different
pulse widths.
Press the [Meas] front panel key (next to the Cursors knob).
Press the Clear Meas softkey; then press the Clear All softkey.
Press the Type softkey; then select the + Width measurement using the
Entry knob.
Either push the Entry knob or press the Add Measurement softkey to
select this measurement.
3000 X-Series Oscilloscopes Advanced Training Guide
Figure 8. Let's