Integra DTR-40.2 Instruction Manual page 49

HDMI Input
If you connect a video component to an HDMI input, you
must assign that input to an input selector. For example, if
you connect your Blu-ray Disc/DVD player to HDMI
IN 2, you must assign "HDMI2" to the "BD/DVD" input
selector.
If you've connected your TV to the AV receiver with an
HDMI cable, composite video, S-video and component
video sources can be upconverted
HDMI output. You can set this for each input selector by
selecting the "- - - - -" option.
Composite video, S-Video,
component video
Composite video, S-Video,
component video
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
PC
AUX
TUNER
TV/CD
PHONO
PORT
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, PC,
TV/CD, PHONO, PORT

HDMI1, HDMI2, HDMI3, HDMI4, HDMI5,
HDMI6:
Select the HDMI IN to which the video component
has been connected.

- - - - -:
Output composite video, S-Video, and component
video sources from the HDMI output. The video out-
put signal from the HDMI output is the one config-
ured in "Component Video Input"
• "AUX" is used only for input from the front panel.
• Each HDMI input cannot be assigned to two input selec-
tors or more. When HDMI1 - HDMI6 have already
been assigned, you must set first any unused input selec-
tors to "- - - - -" or you will be unable to assign HDMI1
- HDMI6 to input selector.
Note
• For composite video, S-Video, and component video upconver-
sion for the HDMI output, the "HDMI Input" setting must be
set to "- - - - -". See "Video Connection Formats" for more infor-
mation on video signal flow and upconversion
• If no video component is connected to HDMI output (even if the
HDMI input is assigned), the AV receiver selects the video
source based on the setting of "Component Video Input".
* and output by the
HDMI
IN
OUT
HDMI
Default assignment
HDMI1
HDMI2
HDMI3
HDMI4
HDMI5
FRONT (Fixed)
- - - - - (Fixed)
- - - - -
- - - - -
- - - - -
(➔ 49).
22).
(➔
• When an HDMI IN is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the "Digital
Audio Input" (➔ 50). In this case, if you want to use the coaxial
or optical audio input, make the selection in the Audio Selector
in the Home menu (➔ 26).
• "TUNER" selector cannot be assigned and is fixed at the
"- - - - -" option.
• If you connect a component (such as UP-A1 Dock that seated
iPod) to UNIVERSAL PORT jack, you cannot assign any input
to "PORT" selector.
• Do not assign the component connected with the HDMI input to
"TV/CD" selector when you set "TV Control" setting to "On"
(➔ 62). Otherwise, appropriate CEC (Consumer Electronics
Control) operation will not be guaranteed.
Component Video Input
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2, you must assign "IN2" to
the "BD/DVD" input selector.
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
PC
AUX
TUNER
TV/CD
PHONO
PORT
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX,
TV/CD, PHONO, PORT
IN1, IN2, IN3:
Select a corresponding component video input that
the video component has been connected.
- - - - -:
Select if you are using HDMI output, rather than the
COMPONENT VIDEO MONITOR OUT, for the
output from composite video, S-Video, and compo-
nent video sources.
Note
• If you connect a component (such as UP-A1 Dock that seated
iPod) to the UNIVERSAL PORT jack, you cannot assign any
input to "PORT" selector.
Default assignment
IN1
- - - - -
IN2
IN3
- - - - -
- - - - -
- - - - - (Fixed)
- - - - -
- - - - -
- - - - -
En
49