Care & Cleaning - Grinder - Oster BVSTEM7300 Instruction Manual

Conical Burrs are used to grind coffee beans to
a suitable size for espresso extraction. Deposits
of grinds & oils build up over time, affecting
GRINDER
the taste of the espresso & operation of the
OUTLET
integrated Grinder.
Cleaning Grinding Cradle & Grind Outlet
MOLINILLO
• Weekly
PRESIONAR Y MANTENER
Remove any coffee grinds from the Grinding
GRINDER
Cradle & Grind Outlet with the Cleaning Brush
OUTLET
and wipe with a damp cloth, wipe dry.
GRINDER
OUTLET
Cleaning the Bean Hopper
TURN
GRINDER
OUTLET
• 2-3 Months
If the Grinder is used frequently (everyday),
the Bean Hopper needs to be cleaned to
ensure best performance.
CAUTION: To prevent damage to the appliance
do not use alkaline cleaning agents, abrasives
or metal scourers.
WARNING: Do not immerse the machine
TURN
in water.
• Preparing to Clean Bean Hopper
- Turn off the machine, switch off & unplug at
power outlet.
- Make note of the current Grind Setting
TURN
(to use as the starting point after cleaning).
• Remove and Clean Bean Hopper
TURN
MOLINILLO
PRESIONAR Y MANTENER
- Turn Bean Hopper fully anti-clockwise, to
close the Hopper Gates and unlock the Bean
Hopper.
- Remove the Bean Hopper from the Grinder
Collar and store any remaining beans in an
airtight container to preserve their freshness.
MOLINILLO
PRESIONAR Y MANTENER
PRESIONAR Y MANTENER
BVSTEM7300-054_19ESM4 (LA).indd 26
CARE & CLEANING - GRINDER
MOLINILLO
PRESIONAR Y MANTENER
MOLINILLO
PRESIONAR Y MANTENER
PUSH DOWN
MOLINILLO
PRESIONAR Y MANTENER
AT THE SAME TIME
PUSH DOWN
S
PUSH DOWN GROUP HANDLE
AT THE SAME TIME
PUSH DOWN
PUSH DOWN
AT THE SAME TIME
S
PUSH DOWN GROUP HANDLE
AT THE SAME TIME
S
PUSH DOWN GROUP HANDLE
S
PUSH DOWN GROUP HANDLE
MOLINILLO
2.REMOVE
1.TURN
2.REMOVE
- Wash the Bean Hopper in warm soapy water,
then rinse & dry. Let the Bean Hopper stand to
CLEAR OF
COFFEE BEANS
allow thorough air drying before replacing.
& GRINDS
1.TURN
• Replace Bean Hopper
- Ensure the Grinder Collar is clear of coffee
beans or grinds.
1.TURN
CLEAR OF
COFFEE BEANS
ALIGN HOPPER GUIDE
& GRINDS
2.REMOVE
HOPPER
GUIDE
CLEAR OF
COFFEE BEANS
1.TURN
& GRINDS
Note: Coffee grinds caught under the Top Burr
may prevent the Bean Hopper from seating
REMOVE
correctly. If this happens grind off excess coffee
ALIGN HOPPER GUIDE
beans, see page 27-28.
CLEAR OF
- Ensure the Hopper Guide is aligned with the
COFFEE BEANS
& GRINDS
vertical white lines on the Hopper base.
HOPPER - Align & insert the Bean Hopper into the
GUIDE
Grinder Collar and firmly pushing down turn
ALIGN HOPPER GUIDE
clockwise to lock into place and open the
Hopper Guide.
ALIGN HOPPER GUIDE
TOP COVER
HOPPER
REMOVE
GRINDER
GUIDE
COLLAR
HOPPER
GUIDE
REMOVE
- Reset to the Grind Setting noted prior
to cleaning.
REMOVE
Note: After cleaning, the optimum Grind Setting
may have changed. To find the optimum Grind
Setting use the information on pages 13-14.
TOP COVER
GRINDER
COLLAR
TOP COVER
GRINDER
English - 26
COLLAR
AIR TIGHT
CONTAINER
2.REMOVE
AIR TIGHT
CONTAINER
1. ALIGN & INSERT
2.TURN
AIR TIGHT
CONTAINER
1. ALIGN & INSERT
2.TURN
1. ALIGN & INSERT
1. ALIGN & INSERT
2.TURN
2.TURN
GRINDER
BARISTA MAX
GRINDER
MANUAL SHOT
BARISTA MAX
TOP COVER
GRINDER
COLLAR
GRINDER
BARISTA MAX
GRINDER
MANUAL SHOT
BARISTA MAX
AIR TIGHT
CONTAINER
6/26/19 09:34