Advertisement
ENTER NEW PASSWORD :
ESC : QUIT
RETYPE NEW PASSWORD :
ESC : QUIT
You need to retype the password again for rechecking your previous key-in password is
matched or not.
ESC : QUIT
d. The "CONSOLE ON/OFF "means to manage the console of KVM switch. If you select
"CONSOLE ON ", it means that any user can use the console. If you select
"CONSOLE OFF "(factory default OFF state) , it means that any user will not be
allowed to use the console unless you enter the password. When you enter the
password already and pass the KVM switch authentication, the CONSOLE will be set
to ON. After you finish using KVM switch, please don't forget to set up CONSOLE ON
state to OFF state. Besides, if current CONSOLE is ON state and you reset KVM
switch, the CONSOLE will be set up ON state back to OFF state.
e. When you finish the set up of PC name and get out of OSD setting mode, you will find
the PC name showed at the up-left corner of monitor. Now, you can use ESC key to
clear the message right away if you don't need it.
f. If you want OSD returning back to factory default value, you can execute
"SCROLLLOCK", "SCROLL LOCK" , "R" keys in order The bank seven segment LED
on the front panel will be flashed during the refresh process.
When the OSD value back to default setting, the bank seven segment LED on the front panel
will stop flashing.
NEW PASSWORD COMPLETE
102
☼SYSTEM 02
ROM REFLASH
ENTER : COMPLETE
ENTER : COMPLETE
ENTER : COMPLETE
40
Console User
s Manual
'
Advertisement
