I-Tech DKP-115 Series User Manual page 34

Note: Before you are not familiar with the operation of OSD menu, please don't change the
password – i.e. keep default eight zero (00000000) value. Otherwise, if you have set the
password and unfortunately forget the password, you need contact to your distributor for
maintaining the password.
Keyboard Hot Key Commands:
You can also conveniently command Console by switching ports through simple key
sequences. To send commands to Console, the "SCROLL LOCK" key must be pressed
twice within 2 seconds. You will hear a beep for confirmation and the keyboard is in hot
key mode. If you have not pressed any key in hot key mode within 2 seconds (It means to
key in any key follows up "Scroll Lock" "Scroll Lock" key ), the keyboard will back to under
Operation System control state.
Below are the different hot key commands:
within 2 seconds
Scroll Scroll
+
Lock Lock
Scroll Scroll
+
Lock Lock
Scroll Scroll
+
Lock Lock
Scroll Scroll
+
Lock Lock
↑
+ =
Previous Power On Channel (PC is Power On)
↓
+ = Next Power On Channel (PC is Power On)
(Note: You also could press "up arrow key"
or "down arrow key" longer time to speed up
selecting the destination port)
Page
+ =
Previous Bank (PC is power on)
Up
Page
+ = Next Bank (PC is power on)
Down
34
Console User s Manual
'