Advertisement
7. Install three screws in rear of the console. (Both sides)
8. Finish installation as below.
3.1.4 Replace longer bracket Step (For rack depth 828~1000mm)
1.
Release six screws.
2. Take rear bracket out.
Input rear long bracket to rear of the rail
3.
Tight-up 2~3 screws upon the length you need. One is forbidden.
4.
Repeat step 1~3 for the other side.
5. Repeat 3.1.3 step to install console to cabinet.
Original bracket
Rear long bracket
then adjust rear bracket to fit your cabinet.
25
Console user
s manual
'
Advertisement
