Advertisement
of console unit. The other end of input cable will have three connector; a HDDB-15 pin
male type for PC video, a Mini Din 6 pin female type for keyboard and Mini Din 6 pin female
type for mouse. To plug these three connectors into the respective ports of computer.
Repeat the same procedure to all of PCs.
Step 2:
Double-check all of the connections. You can check the color of keyboard and mouse
connector to make sure the keyboard and mouse cables go to the correct ports.
Step 3:
Attach the power supply to the Console unit and plug the other end into an electrical
receptacle. Now you will see the LED for port 1 light up, and you will hear a beep. Switch
on your monitor.
Note:
Please be remind to plug in power adapter. Although the PCs connected to KVM
Switch are able to support enough power to the stand alone switch, KVM Switch still
needs a power adapter for daisy chain more banks. If you forgot to plug in power
adapter on the status of daisy chain, it may cause the unexpected status occurred.
4.8 Usage
The power on state of 8/16 port KVM switch:
When you power on KVM switch, it will ask you the password, the default password value
is eight zero –" 00000000 ". Please key in eight zero and enter the same value at retype
field.
33
Console User
s Manual
'
The rear side of PC
Advertisement
