CONCORD JamCam 3.0 User Manual page 6

shutter button, the Self-Timer Indicator light on the front
of the camera will flash at increasingly rapid rates before
the camera takes a picture. The total time is 10 seconds.
Using the Flash
Press the Menu button until the
flash icon is selected. Use the
On/Off/Select button to turn
the flash setting to on, off or
automatic (AU). When the flash is in On mode, the flash
will trigger for every picture. When the flash is in
automatic mode, the camera will assess the light of your
setting and flash if necessary. In between pictures, the
flash icon will blink while the flash is recharging.
Changing Resolutions
The default resolution for JamCam 3.0
is R2 ( 640 x 480 ) . To change to a
different resolution, press the Menu
button until the resolution settings
are highlighted. Then press the On/Off/Select button
to switch between R2 and R1 ( 320 x 240 ) .
We recommend using the R2 setting for all images
you will want to print, use in projects, or post to a
web site. R2 pictures are substantially clearer, but you
cannot store as many pictures into JamCam's memory
as you can at the R1 setting. Use the R1 setting for
e-mails, 2"x 3" (or smaller) wallet photos,
or for small web site images.
4
FlashOn/AU Flash Off
Pictures Remaining
Depending on the resolution, JamCam 3.0's internal
memory can hold up to 8 R2 pictures or 28 R1
pictures. You can also take a combination of R2 and
R1 pictures. After you take a picture, the JamCam 3.0
LCD will tell you how many pictures you have left at
the current resolution.
Adding More Memory
JamCam 3.0 features a MultiMediaCard
slot that allows for added picture memory.
After purchasing a MultiMediaCard, simply
insert the card into the MultiMediaCard slot on the
JamCam 3.0 with the camera turned off. When you
turn the camera on, you will see an increased picture
capacity. MultiMediaCards are available at
www.jamonline.com or your local computer retailer.
Note: The insertion or removal of a memory card when the
camera is on will not be recognized by the camera.
Only insert or remove a MMC card when the camera is off.
Clearing the Camera
Press the Menu button until the
LCD reads "CLr" . Press the
On/Off /Select button. The camera
will flash "- - -" while the pictures are clearing.
JamCam3.0 is now permanently cleared of all its pictures.
No Film, No Developing Time
So, you have taken pictures. Great! Let's now upload
them onto your computer and see how they look...