Adjusting The Image Position Of The Either Side Of The Paper - Ricoh Pro C5300S Operator's Manual

Settings
Apply Duplex
Apply Auto Paper Select
Advanced Settings
*1 Can be changed only by the machine administrator.
• Before changing these settings, check that the size and type of your paper are compatible with the
paper tray that you want to load the paper in. Tray compatibility depends on the paper's size and
type.
• When you use custom size paper, we recommend using paper that has a horizontal length of
700.0 mm (27.55 inches) or less.

Adjusting the Image Position of the Either Side of the Paper

To align the image position on the front with that on the back, perform [Registration to Align Front and
Back Images].
In [Registration to Align Front and Back Images], there are 3 items: Manual Adjustment, Auto
Adjustment, Quick Auto Adjustment.
Adjusted values are saved as custom paper settings.
Requirements for Aligning Front and Back Image Positions
• Custom paper with a paper type and thickness that supports duplex printing is allocated to the
paper tray.
• The paper size is within the following range:
• Vertical length: 182.0-330.2 mm (7.17–13.00 inches)
• Horizontal length: 182.0-487.7 mm (7.17–19.20 inches)
Manual Adjustment
Manually align the image position and magnification on the front and back.
Custom papers that have been
registered using the master library
(listed with an icon
Available
Available
*1
Available
Custom papers that have been
registered by specifying paper
types and weight (listed with no
or )
icons)
Available
Available
Available
Registering Custom Paper
*1
309