Setting The Zone Number; Setting The Home Number - Aprilaire 8710 Safety & Installation Instructions

8

SETTING THE ZONE NUMBER

Skip this option if using default setting Zone 01 by
pressing the NEXT key..
1. Press and hold the ENTER
display Option 01, setting the Zone Number.
2. Use the UP and DOWN
number, then press the NEXT
When changing Zone numbers, the first thermostat /
module set can use the factory default setting of
Zone = 01 . Set the second set to
Zone = 03 , etc.
Option
CANCEL
key for seven seconds to
keys to change the Zone
key.
Zone = 02 , third set to
Zone
NEXT
ENTER
9

SETTING THE HOME NUMBER

Skip this option if using the default setting Home 01 by
by pressing the NEXT key.
The Home number only needs to be changed if there
are neighboring installations that are less than 500 feet
away from one another. If there are no neighboring
installations, use the factory default
1. Use the UP and DOWN
number if necessary.
2. Press the NEXT key.
Option
CANCEL
Home = 01 .
keys to change the Home
Home
NEXT
ENTER
10