Location; Removing The Sub-Base - Aprilaire 8710 Safety & Installation Instructions

THERMOSTAT
3

LOCATION

The thermostat should be located in an area that
represents the ambient space temperature and within
100 feet of the control module. Do not install the
thermostat in an area where drafts are present, near the
floor, behind doors or on an external wall. Avoid placing
the thermostat in areas where the air movement is
limited, affected by direct sunlight or other areas not
typical of the temperature in the space.
4

REMOVING THE SUB-BASE

Hold the sub-base with one hand, press the case as
shown to the right and pull the bottom of the thermostat
from the sub-base. Refer to the illustration to the right.
PRESS HERE TO RELEASE
CASE FROM SUB-BASE
6