Thermostat SAFETY & INSTALLATION INSTRUCTIONS Model 8920W Touch Screen Wi-Fi Thermostat with Integrated Indoor Air Quality Solutions TABLE OF CONTENTS INSTALLATION 2 POWER &...
INSTALLATION EQUIPMENT CONTROL MODULE FIGURE 2 MOUNTING The equipment control module has the THERMOSTAT LOCATION RECOMMENDATIONS following features to simplify mounting and wiring and provide for a clean and Thermostat should be mounted: neat installation • On an interior wall, in a frequently occupied space •...
REMOTE TEMPERATURE SENSOR EQUIPMENT CONTROL MODULE WIRING FIGURE 5 – REMOTE (OPTIONAL) TEMPERATURE SENSOR Wire specifications: A remote temperature sensor can be • 18-24 gauge thermostat wire used for control if the thermostat is to be mounted in a concealed location or Installation notes: a remote sensor can be averaged with •...
UV lights as this may cause the sensor to report false temperature readings • Using less than 300 feet of wire 1. Locate the AprilAire Model 8052 sensor in the supply trunk, after the heat exchanger • Do not route wires along...
INDOOR AIR QUALITY WIRING DIAGRAMS POWER & RESET OPTIONS The equipment control module is powered from 24VAC The thermostat is powered from the equipment control module In the case of power loss the thermostat will maintain the clock FIGURE 16 – INDOOR AIR QUALITY WIRING WITH SEPARATE TRANSFORMERS for 24 hours The thermostat has a memory backup that saves the thermostat settings in case of power interruption TRANSFORMER...
TABLE 2 – THERMOSTAT SYSTEM SETTINGS TABLE 2 – THERMOSTAT SYSTEM SETTINGS Factory default setting Factory default setting System setting Description (bold) and setting range System setting Description (bold) and setting range NOTE: Equipment Type related settings will Heat/Cool Disabled Equipment Type Auto Changeover Enable or disable Auto Changeover mode...
10 to 20% The use of an outdoor temperature sensor (recommended) enables additional Indoor Air dehumidifier are installed.) Quality functionality Please refer to the Model 8920W Owner’s Manual for further information about thermostat 300h Valve Selects when the Change Water Panel features...
TABLE 4 – DEHUMIDIFIER SYSTEM SETTINGS TABLE 6 – FRESH AIR SYSTEM SETTINGS Factory default setting Factory default setting (bold) System setting Description (bold) and setting range System setting Description and setting range Selects if a dehumidifier is installed. (If set None Selects if ventilation is installed (If set to Dehumidifier Type Fresh Air Vent to None, no other dehumidifier settings will...
WI-FI SETUP IS OFF FOR CONNECT TO 30 SECONDS) WI-FI NETWORKS For detailed instructions for connecting the thermostat to a Wi-Fi network and registering it to an AprilAire account, refer to the Wi-Fi Quick Start Guide included in the box...
INSTALLER MENU THERMOSTAT FEATURES USB SETTINGS AIR CLEANER • Remote access and control over Wi-Fi FILE IMPORT, ETC CONFIGURATION • Indoor air quality control − Humidification automatic or manual control. VENTILATION CONFIGURATION THERMOSTAT & − Dehumidification. HVAC SYSTEM CONFIGURATION − Event-Based™ air cleaning IMPORT/EXPORT USB INSTALLER −...
TROUBLESHOOTING SPECIFICATIONS DISPLAY IS BLANK FAN DOES NOT TURN ON IN A CALL FOR HEAT ENVIRONMENT Temperature (shipping) -30° to 150°F (-34° to 65°C) • Check Installer Setting Fan Control In If Power LED is not illuminated at the Heating / Heat Pump Auxiliary Type, to equipment control module check the Temperature thermostat (operating) 32°...