Terminals And Adjustments - Honeywell M9484 Manual

CLOSE LIMIT
I CTION OF MOTOR TRAVEL AS VIEWED FROM POWE
D R E
POWER SUPPLY TO CONTROLLER TERMINALS. PROVIDE DISCONNECT
MEANS AND OVERLOAD PROTECTION AS REQUIRED.
3 TURN LIMIT POT FULL CLOCKWISE~FOR 160' STROKE, FULL
FIG. 5-lNTERNAL WIRING OF An9494 MODUTROL
MOTORS.
E N .
R D
MINIMUM
NOTE: FEATURES AVAILABLE ON SOME MODELS ONLY.
FIG. 7-TERMINALS AND ADJUSTMENTS.
BLUE LEAD
I
1 WIRING SHOULD BE NEC CLASS 1 UNLESS POWER SUPPLY
MEETS CLASS 2 REQUIREMENTS. TAPE UNUSED LEADS. MAKE
CERTAIN THE CURRENT DRAW OF THE EXTERNAL CIRCUIT IS
LESS THAN CONTACT RATING OF SWITCH.
2 ON TWO-SWITCH MOTORS SECOND SWITCH HAS BLACK
LEADS WITH BLUE, YELLOW. AND RED TRACERS.
FIG. 6-AUXILIARY SWITCH INTERNAL WIRING.
STROKE ADJUSl
CAMS (YELLOW)
INNER AUXILIARY
INNER AUXILIARY
SWITCH CAM (BLUE)
OUTER AUXILIARY
SWITCH CAM (RED)
OUTER AUXILIARY
STROKE POT
YELLOW LEAD
1
2
63-2195-l