Table of Contents
Advertisement
STANDARD MODELS
94 is Series 90
Power Rating
150 lb.-in. at
standard timing
9 is high torque
300 lb.-in.at
2 or 4 min timing
Output Drive
4 is dual-ended shaft,
non-spring return
1 is single-ended shaft,
non-spring return
NOTE: Some motors furnished to equipment manufactur-
ers will have no adapter bracket, a single-ended shaft
and/or no wiring box.
CONTROLLER TYPE: Series 90 Control Circuit-135
ohm series 90 proportioning controller. Series 90 high
or low limit controller with manual minimum position po-
tentiometer (with a combined total resistance of up to
500 ohms) may also be used in the control circuit.
MOTOR ROTATION: Normally closeda. The closed posi-
tion is the limit of counterclockwise rotation as viewed
from the power end of the motor. See Fig 2.
clockwise (as viewed from the power end). Motors are
shipped in the closed position.
WHEN PURCHASING REPLACEMENT AND MODERNIZATION PRODUCTS FROM YOUR AUTHORIZED
DISTRIBUTOR, REFER TO THE TRADELINE CATALOG OR PRICE SHEETS FOR COMPLETE ORDERING
NUMBER.
IF YOU HAVE ADDITIONAL QUESTIONS, NEED FURTHER INFORMATION, OR WOULD LIKE TO COMMENT
ON OUR PRODUCTS OR SERVICES, PLEASE WRITE OR PHONE:
1.
YOUR LOCAL HONEYWELL RESIDENTIAL AND BUILDING CONTROLS SALES OFFICE (CHECK WHITE
PAGES OF PHONE DIRECTORY).
2.
HONEYWELL INC., 1885 DOUGLAS DRIVE NORTH
MINNEAPOLIS, MINNESOTA 55422-4386 (612)542-7500
(IN CANADA-HONEYWELL LIMITED/HONEYWELL LIMITEE, 740 ELLESMERE ROAD, SCARBOROUGH,
ONTARIO Ml P 2V9) INTERNATfONAL SALES AND SERVICE OFFICES IN ALL PRINCIPAL CITIES OF THE
WORLD.
D:
is adjustable stroke
No auxiliary switches
E:
is adjustable stroke
1 auxiliary switch
F:
is adjustable stroke
2 auxiliary switches
ELECTRICAL RATINGS:
VOLTAGE
Without
Transformer
With internal
Transformer
STROKE: Field adjustable from 90" to 160". Start position
of shaft changes with adjustment of stroke. (Midpoint of
stroke remains fixed as stroke is adjusted, as shown in
Fig. 2.) Stroke is adjusted by means of cams located in
wiring compartment. (See Stroke Setting Procedure.)
Motors are shipped with stroke set at 90".
DEAD WEIGHT LOAD ON SHAFT:
Power or Auxiliary End-200 lb. [90.8 kg] maximum.
Maximum Combined Load-300 lb. [136 kg].
AMBIENT TEMPERATURE RATINGS:
Minimum-minus 40" F [-40° C].
CRANKSHAFT: 318 inch [9.5mm] square
M9484, M9494 have double-ended shaft.
M9481, M9491 have single-ended shaft.
with controller disconnected.
2
CURRENT CONSUMP-
DRAW (A)
24
0.8
120
0.24
208
0.14
240
0.12
POWER
18
23
23
23
Hide quick links:
Advertisement
Table of Contents
