Details - Citizen iDP-460 User Manual

10-3-2Details

LF or CR
[Name]
[Code]
[Function]
[Caution]
[See Also]
FF
[Name]
[Code]
[Function]
[See Also]
Feed Paper
<0A>H or <0D>H
This command prints the data in the print buffer and feeds the paper by one line.
printing is completed, the command will shifts a printing position to the left margin and
clear the print buffer.
CR command becomes invalid when DS1-1 is OFF.
In other than the P-250 mode and P-900R mode, this command is ignored immediately
after one-line buffer-full printing.
P-900R mode, printing is not performed until this command is received.
ESC a, ESC b
Eject Paper
<0C>H
This command prints the data in the print buffer and ejects the paper by one inch,
regardless of the current setting of line height.
last line of the text and leaves an adequate margin in order to cut the paper.
ESC a
This is a standard command for printing one text line.
In the P-250 mode and
32
iDP-460 User's Manual
This command allows you to view the
ALL
If
ALL
CITIZEN